Handlebars

Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g

The No.9 12F Carbon is Whisky’s most versatile drop bar, that’s equally at home on tarmac, gravel, twisty cyclocross courses, and double-track. From touring to racing, this modern bar is a great addition to almost any bike. The comfortable 12-degree flare provides excellent control and comfort, especially off-road or in challenging conditions. A semi-compact design offers seamless transitions between positions, and we’ve made smart updates to improve compatibility with all your favorite drop bar controls. - Unidirectional carbon fiber construction with new carbon layup to better accommodate clamping forces of modern controls - Drop/Reach: 115/68mm

The Surly Truck Stop Handlebar combines the benefits of a drop bar with those of a riser bar. Offering a variety of hand positions for comfort over the long haul, it also features 30mm of rise for a more upright and relaxed riding position. With a clean aesthetic, it’s a great option for taller riders looking for more rise and for bikes with a low-cut steer tube. - Lightweight, aluminum construction - Available in various widths - 31.8mm clamp diameter

With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build. - Material: 6061 alloy - Width: 670mm - Rise: 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 25.4mm - Bar-end compatible: yes - Weight: 399g

- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos

This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky

Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. - Lightweight and strong 6061-T6 aluminum alloy construction - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Weight: 357g (44cm)

The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio

This is Zipp's innovative all-road handlebar, the Service Course SL 70 XPLR. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle—from paved roads onto gravel, mud, dirt, and even single track. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Today's riders demand a few things out of their cockpit, whether they are doing a two hour training ride from home or a 200 mile gravel adventure: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics: outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward. - Distinctive Zipp cosmetics - 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops postion - 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods - Ergonomic top with 3° backsweep - Lifetime warranty

Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. - Lightweight and strong 7050-T6 series aluminum alloy construction - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Weight: 329g (44cm)

Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.

For the ultimate in comfort and control over long distances, our all-carbon Scully Bar pairs a 5-degree upsweep with a 23-degree backsweep. Featuring an elegant forward bend before sweeping back again, its easy, natural hand position inspires confidence. It’s also blissfully wide, offering loads of real estate up top for mounting lights, bags, bikepacking gear, and more. ISO tested for harsh terrain, the Scully Bar is a sleek and stiff upgrade for paved commutes and whatever off-road riding you’re into — gravel, XC, singletrack, and beyond. Offered with 20mm of rise in two trimmable widths, the ideal fit is out there.

Whisky's all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar's flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories, including aero bars. - Available in five widths, measured center-to-center at the hoods: 40, 42, 44, 46, 48cm - Compound flare — 12 degrees at the hoods and 20 degrees through the drops - Drop/Reach: 100mm/68mm - 31.8mm clamp diameter Specifications: - Bar Top Style: Flat - Width Measurement: Center - Bar Clamp Diameter (mm): 31.8 - Accessory Mount Diameter: 31.8 - Bar Reach (mm): 68 - Material: Carbon - Clip-on Compatible: Yes - Bar Drop (mm): 100 - Flare: 20 - Defined Color: Black - Weight: 236 - Drop Bend Style: Compact

The No.9 6F Carbon is Whisky's modern racing styled drop bar. It is equally at home on tarmac, gravel or twisty cyclocross courses. From group rides to racing, this bar is a great addition to almost any bike. The comfortable 6-degree flare provides excellent control and comfort with just enough forearm clearance from the drops. This bar features a slightly deeper drop section compared to Whisky's wider flared offerings. The reach is also slightly shorter to compensate for the now-common, longer hydraulic STI levers from many manufacturers. - Unidirectional carbon fiber construction - Measured Center-to-Center at the levers - Drop/Reach: 125/67mm - 6 deg flared drop - Clamping Torque: 5Nm

Deity Speedway Handlebars: at 810mm wide with a 30mm rise, this 35mm bore handlebar is impressively responsive and comfortable at the same time. Designed for the sweet spot that absorbs maximum vibration, chatter and impact while maintaining the stiff reactive feeling that allows you to dance on the edge of catastrophe, ever increasing your need for speed.

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 XPLR, our newest drop-bar offering. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle — from paved roads to gravel, mud, dirt, and even singletrack. The Service Course 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Whether on a two-hour training ride from home or a 200-mile gravel adventure, today's riders demand more of their cockpit: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops while focusing on two crucial metrics — outsweep and flare. - Bar drops provide a wider, balanced, and secure position with drops that are about 6cm wider than the hoods position for technical or intense riding. - The 70 XPLR features an ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul. - Reach: 70mm - Drop: 115mm

The WCS Carbon Logic-E Flat bar ties together Ritchey's historic mountain biking heritage with the demands of today's modern electronic drivetrains. Designed to accommodate the internal routing of Shimano EW-SD50 wires for either Shimano Di2 or STEPS systems, this bar is built to be light and compliant for incredible durability and a supple, refined ride. The WCS Carbon Logic-E Flat bar is the choice for XC riders looking for a high-end carbon eMTB bar that's built for performance. The WCS Carbon Logic-E Flat bar features Ritchey's proven WCS carbon technology in a flat mountain bike bar with internal reinforcement and a textured stem clamp area to reduce the risk of bar slippage. - Material: carbon fiber - Width: 740mm (cutting not recommended) - Rise: 5mm - Backsweep: 9° - Upsweep: 1.5° - Clamp diameter: 31.8mm - Bar-end compatible: no - Weight: 163g - Electronic compatibility: Shimano Di2 / STEPS (Shimano EW-SD50 cable—internal routing) - For proper assembly, stems with open faceplates such as the Ritchey C220, Trail is required.

If variety is the spice of life, then the Moloko bar oozes umami at every bend. It offers a multitude of hand positions to keep you comfortable and in control over the course of a long day riding over varied terrain. It also has plenty of spots to mount your various accessories. Dangle a handlebar bag from it, strap some lights to it, throw a GPS on it (if that's your thing), and ride all day. It comes in a standard width of 735mm but if 685mm is more your style, don't you worry. Surly added cut marks so you can easily make it so. - Material: CroMoly steel - Clamp diameter: 31.8mm - Width: 735mm; Cut marks for 685mm - Rise: 0 - Sweep Angle: 34 degrees - Weight: 709g - Color: E.D. coated Black

With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 862g - Lever Compatibility: Mountain 22.2mm

For all the off-road drop bar fans, Velo Orange offers the Far Bar, an affordable off-road drop bar. With off-road drop bars, most riders have the bars set up at the same height as they would have flat bars set to. Most of the time you are riding, your hands are on the hoods of the brake levers. Then, for steep descents, put your butt back behind the saddle and use the drops to get a better grip on the brake levers. You can run brifters or standard road brake levers on them and use bar end shifters as well. The Daija Cycleworks crest appears on each side of the 31.8 mm clamp area. These bars are a little different then road bars in terms of measuring the width. The listed width - 44cm or 48 cm - is measured center of the drops to centre of the hoods. The overall width is 585mm for the 44cm size, 625mm for the 48cm size. - Weight: 292g - Drop: 110mm - Drop Bend Style: Compact - Reach: 76mm - Material: Aluminum - Bar Top Style: Round

A wealth of rise and plenty of backsweep make Dimension Cruiser bars great for a comfortable, upright riding position. - AL-6061 aluminum alloy - ISO4210 safety tested for city/trekking use - Not recommended for use with bar-ends or clip-on aero bars - 50-degree sweep

All Jones H-Bars use a 31.8mm stem clamp diameter, 22.2mm clamp size for controls (standard mountain bike style). All my bars are H-bars. H-bar for Handle-Bar. They have the 45 degrees of sweep, the 0.5" vertical offset, and a multitude of hand-positions. But could I offer more, with less? Yes. Back to basics, back to the beginning, with a twist. Well, with a bend....the Bend H-Bar. The original concept, the 45 degrees of sweep but with the bend, where it is, ensures shifters and levers are a simple fit and the one piece butted aluminium construction delivers a bar 170g lighter than a Loop. Less hand position options, less stuff-mounting space, marginally less stiff but all you might ever need in an H-Bar. No more, no less. The Jones Bend H-Bar. The bikes I ride for long distances or at night have the Loop H-Bars so I have more hand positions and mounting points. The Bend H-Bar is nice for bikes that don't need things attached to the front of the bar (light, GPS, etc.) or an aero position. I am using the Bend H-Bar on my single-track day riding bikes and it's great. Widths - 710mm 355 grams (Best with Jones 205mm Grips)

WCS VentureMax Drop Handlebar - Evo sweep of 6 degrees - 24 degrees of flare - Ergo Bio-bend - Compatible with all hood types

Triple-butted 7075-T6 aluminum construction with provisions for STI/Ergopower cable routing\n- Rapid Hand Movement (RHM) bend with a patented Continuous Incremental Radius design provides a modern, shallow-ergonomic profile with more hand positions than traditional anatomic shapes - Drop/reach are measured center-to-center, width is measured outside-to-outside (O-O) - The drops flare outward at 12 deg angle and extend the width (O-O) an additional 60mm. 260g (42cm)

- Constructed of 7050 aluminum and features built-in bar plugs for added safety. Bar diameter is 15.5mm, works with J-Unit grips only

Classic Cinelli Criterium bars with a milky silver anodized finish - 6061 T6 aluminum alloy construction with center sizing sleeve - 280 grams @ 40cm: all measurements are center-to-center

A25 Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

- Unique multi-use bar with excellent ergonomics and adjustable extensions. - These horns and clamps are not fixed, so you can rotate them so they point toward each other or turn up. Swapping the clamps to the opposite side will yield a different extension position. - Shot peened 6061 aluminum - Forward bend from clamp area negates the need to change stems to make up for the grip area sweep. 1.5" rise for ideal positioning - Bars can be flipped for another take on moustache bars

Flared Adventure and Gravel bar made of EC90 carbon composite - 16 degrees of flare (adds 68mm to bar width at tip of drops) - Each width of bar has a unique diameter and length ergonomic top section - Maximum Contact Drop (MCD) shape for comfort and control - Internal routing for Di2 wiring - 208g @ 42cm (width measured center-to-center)

Flared Adventure and Gravel bar made of EC90 carbon composite - 10 degrees of flare (adds 68mm to bar width at tip of drops) - Ergonomic top section and size-specific shape to optimize strength, weight and ride feel - Maximum Contact Drop (MCD) shape for comfort and control - Internal routing for Di2 wiring - 205g @ 42cm (width measured center-to-center)

The Renthal Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar. Designed and developed to offer the ultimate combination of lightness, strength and durability - The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing - Exclusive Series 7 aluminum is heat treated to provide strength and durability - Shot peened to increase fatigue life and durability - Hard anodized to keep your handlebar looking new

- Ergonomically comfortable drops with with an outward flare angle through the drop section - Flared bars enhance bar width and overall bike control, while also providing an ergonomically comfortable feel - Great for CX and Gravel racing, as well as a neat option for touring or commuting - Durable shot peened and anodized finish - 23.8mm tube with 31.8mm stem clamp bulge - 11 degree flare angle with 80mm reach, 130mm drop. Widths are measured at the lever clamp area (flare adds 40mm to the overall) - Control cable groove indents - 6061 T6 butted, heat treated aluminum alloy

Wider than the Clarence, with more room for accessories in the middle - 6061-T6 aluminum with 135mm straight section at the center - Forward bend from clamp area negates the need to change stems to make up for the grip area sweep

- 7050 ProTaper alloy optimizes strength while reducing weight - Cut mark graphics aid in customizing fit

- Internal routing for Shimano STEPS switch units and tested to the very demanding Zedler E-MTB Advanced Plus standard and the international DH standard (ASTM Cat. 5 Downhill) - Patented oval bar shape provides increased vertical compliance - Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips - Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response - Third party online sales are strictly prohibited by manufacturer

- The original Chromag bar - Used from XC to DH, the OSX is Chromag's most versatile option - 31.8mm clamp Specs: - Rise: 25mm - Handlebar Width: 800mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Upsweep: 5 degrees - Backsweep: 8 degrees

- Double-butted 6061-T6 aluminum construction - RHM Shallow-ergonomic profile with more hand positions than traditional anatomic shapes - Black anodized - Drop/reach are measured center-to-center, width is measured outside-to-outside - 280g (42cm)

- 6061-T6 polished aluminum finish in black or silver - Grip Area Diameter: 22.2mm - The internal diameter of the ends are machined to fit some bar end shifters and reverse brake levers - Bends forward 22-degrees before bending backwards - A design collaboration with Dream Cycle Vancouver

Drop bar designed with off road use in mind. Similar to the Junebug but with a 26.0 clamp and a narrower version available. - Polished 6061 T6 aluminum - Width is measured center-to-center at the bar ends - Grip area has a slight flare - Bar end shifter compatible

Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color

- Drop + Riser="Driser"\n- Stylish 20mm rise provides a higher riding position without the need for stem spacers - Profiled top tube with semi-aero ‚ palm friendly‚ design is ergonomically comfortable - An additional 16 degree flare in the drop area adds 93mm of extra ergonomic enhanced control to the overall width - A great design for CX and Gravel racing, as well as a neat option for touring or commuting - 6061 T6 butted, heat treated aluminum alloy - Durable shot peened and anodized finish - 23.8mm tube with 31.8mm stem clamp bulge - 16 degree flare angle - 75mm reach, 125mm drop (effective drop 105mm) - Widths are measured at the lever clamp area (flare adds 93mm overall) - Control cable groove indents - Black anodized with laser logos

- Provides extra hand positions for gravel, touring and adventure riding - Bar top features an ergo profile for comfort\n- Moderate 25 degree flare angle - Lightweight 6061-T6 alloy construction - 480g (42cm)

Double butted 7075-T6 aluminum bar, designed and tested by Reverse Team Rider Lukas Knopf - Inscribed with his mantra - life is short - stunt it - Includes cutting lines and stem alignment guide marks

E-Element Riser Bar - 7050-T6 aluminum bar with special Element Butting Technology for E-Bike use - Lab tested by EFBE Pruftechnik in Germany, certified for safe use on E-Bikes under the toughest conditions - Includes cutting lines and stem alignment guide marks

- World Cup DH proven double butted 7075-T6 aluminum bar - Designed with Downhill as well as All Mountain and Enduro riding in mind - 790mm width provides confidence for even the toughest trails

Atmos is our new premium offering for cross-country performance. The Atmos carbon flat bar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 40mm per side allowing you to customize the bar to your preferred width. This is the lightest bar in the Atmos range. - Wide to start and trimmable by 40mm each side - Specialty tuned carbon laminate to absorb noise while maintaining stiffness - 190g at full width SPECIFICATIONS - Type: Flat - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum. - Distinctive Zipp cosmetics - 7050 Aluminum - 80mm reach/125mm drop designed to fit a large number of riders - Clip-on compatible - Lifetime warranty

Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep

This classic touring handlebar is great for bicycle restorations or for adding a touch of traditional class to any bike - 1"(25.4mm) clamp, 2.5" rise, 23.75" wide - Handmade in Maysville, Kentucky

WCS VentureMax Drop Handlebar - Evo sweep of 6 degrees - 24 degrees of flare - Ergo Bio-bend - Compatible with all hood types

Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos

A purpose-built carbon drop bar specifically designed to improve the off-road drop bar ride experience. Whether it’s descending the steep and technical grades at the Crusher in the Tushar, finding more comfortable hand positions during the 200-mile slog across Kansas at the Dirty Kanza, or adventure riding in your own backyard, this full carbon handlebar provides performance-driven gravel riders with the options, comfort, and control they need to grind gravel with confidence.

- DH and Freeride, ultra-wide, 820mm wide handlebar - Big and burly 35mm barclamp with increased strength and stiffness compared to conventional 35mm alloy bars - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Weight optimized and adjustable to 760mm Features: - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design - Material: Zirconium Doped 7-Series Alloy - Weight: ±300g - Diameter: 35mm - Rise: 25mm - Length: 820mm - Geometry: 5° up x 8° back - Finish: Shot peen anodized, decal logos

An updated version of a Ritchey handlebar bend now in a timeless high-polish silver finish. The NeoClassic features the traditional round drops that many Tour de France and Classics champions prefer with a shorter reach and shallower drop. - Material: double-butted 6061 alloy - Bend style: traditional - Top style: round - Width: 400, 420, 440mm - Drop: 128mm - Reach: 73mm - Drop flare: 0° - Flare out: 0° - Backsweep: 0° - Accessory mount diameter: 31.8mm - Compatible with Shimano EW-RS910 junction box - Clip-on compatibility: yes - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Weight: 300g (420mm)

Ergonomnic and elegant, the Whisky 438 Aluminum Scully Bar brings much needed relief for long hours in the saddle – without compromising reach or stem length. The 23-degree backsweep and 5-degree upsweep create an easy, natural handling position, leaving little room for tricep fatigue. The generous clamping space and clean, lightweight design means this ISO tested bar tastes all types of terrain. For a custom feel, the Scully Bar comes in two trimmable widths (820mm and 780mm) to perfect your grip length and enhance overall performance. 

The SES AR Handlebar reveals our vision for the future of road handlebar shaping and design. Purpose-built for the modern road rider, the SES AR handlebar features compound flared drops for confident handling, aerodynamic shaping with internal/external routing options for clean airflow and aesthetics, and a carbon laminate that has been tuned for responsive handling without sacrificing comfort. - Application: Road Race, All-Road, Gravel, Cyclocross - Sizes: 38cm, 40cm, 42cm, 44cm, 46cm - Weights: 243g, 245g, 248g, 262g, 280g - Full Integrated Internal or External Routing - Lifetime Incident Protection and 5 Year Factory Warranty

The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist. - Double butted 6061 alloy construction - Gentle sweep for ergonomic performance - Bar Clamp Diameter: 31.8mm - Rise: 5mm - Weight: 276g

The No.9 24F carbon drop bar is designed for comfort and control in challenging situations. Specifically aimed at long-distance touring, gravel, and off-road pursuits, the 24-degree flare offers huge control from the drops. The carbon construction provides a light, stable platform that reduces vibration and adds comfort, plus a new carbon layup that better accommodates clamping forces of modern controls. This thoroughly modern drop bar is the perfect match to your off-road tourer, monster cross bike, or get-rad CX rig. The 24F’s sleek design offers a seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs.

-Show us your ear to ear Grin – 'To Smile' Bar is back -Go further. With this in mind, To Smile Bar was created for cyclists who are seekers and wish to venture off the beaten path. A long-time SimWorks staple bar has been resurrected with a new specification. -This unique handlebar has a shallow curved drop shape, mirrored from our original version- whose shape had been carefully thought out to hit a sweet spot for cyclists who frequently find themselves in the lower grip position. To Smile is designed with the modern gravel & all-terrain scene in the front of our minds. The details have been updated, with the center clamp expanding to 31.8mm, making it compatible with more modern stem standards and offering greater peace of mind while negotiating more challenging terrain. -To Smile is available in one size at 560mm wide bar center-to-center- making it a suitable choice not only for drop-bar MTBs, but also for gravel rigs, monster cross machines, or touring bikes with wider tires. We encourage you to use your creativity to assemble a memorable bike and grab the bottom handlebar. It's sure to put a smile on your face. *The SimWorks by NITTO drop bar series includes the All Star Decal Kit 2 as an accessory. Please enjoy applying it to your handlebars or elsewhere.