Flat

- Full UD carbon construction - 31.8mm clamp diameter - 9-degree back sweep - EN-Mountain safety certification - 200g - Width: 760mm/780mm - Rise: 0mm/7mm - Upsweep / Drop: 4-degree - Back Sweep / Bend: 9-degree

The Flat Top RDO 780mm Handlebar features the same shape and carbon tuning for ride quality and comfort as all of Niner’s carbon components - all backed up with our C5 Carbon Warranty - a 5 year guarantee. 780mm width with cut-down marks to 720mm Bar-end compatible +/- 5mm rise via Flat Top Design, 9º Sweep 195g (full 780 width) Backed by Niner’s C5 Carbon warranty 31.8 camp diameter

Our Ibis Carbon Hi-Fi and Lo-Fi handlebars are adjustable. Using two 25mm wide aluminum inserts that thread into the ends of the bar, you can easily swap between 750mm and 800mm. Or, you can cut the inserts to any measurement in between. - 31.8mm stem clamp diameter - Maximum of 6nm recommended for stem clamp torque - 5 Degree Rise - 9 Degree Sweep - Lo Fi offers a 10mm rise - Hi Fi offers a 30mm rise - Bar comes WITH aluminum end inserts. - Weight: 256g & 236g without inserts installed.

The Jemmy Bar was designed with a few goals in mind: First, we wanted a flat bar geared more toward everyday riding than the Oyster Bar, that didn't sacrifice too much control. Second, we wanted plenty of room between the stem and outer grip section of the bar for straps, accessories, alternate hand positions, you name it. Finally we wanted it to look & feel at home on most ATB's of the 80's and 90's (we recommend a shorter, sub 90mm stem if this is your bike) as well as modern tourers designed around shorter stems and wider bars. With that in mind, the Jemmy Bar was born. It's been tested on everything from Karla & Daniel's touring bikes to our own commuters here in the PNW - If you want a truly versatile bar that is equally at home on a fat tired town bike as it is a modern tourer, This one's for you! The Jemmy bar is: - Full 4130 steel tubing, 22.2mm stem clamp diameter (add shims here if needed). - 850mm wide (uncut), 27 degrees of backsweep, 35mm rise, and 6 degrees of upsweep. - 595g, uncut - Able to be cut to about 740mm while retaining a 185mm grip area. - Made by us in Port Townsend, WA and powder coated by our friends at Stunt Doubles Color. - Not for 'downhill' use. Jumps and bumps under 2 ft. are one thing, rocketing down a mountain another.

The M5 bar is designed with an offset grip position and 31.8mm clamping surface, the bar can be mounted with a positive or negative rise of 5mm. This versatile bar combines a familiar 9degree sweep with the greater width and strength that's demanded by today's more aggressive XC riders. - Includes decal sheet to color match with ENVE wheel decals

For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - Zero-Rise

6061 T6 double-butted aluminum alloy flat bar