Cranksets

The M30 is part of our 30mm spindle line of cranks which also includes the A30, R30 and G30 models. The “M” stands for mountain and the “30” is for the 30mm spindle. The best way to describe this model is, “It’s a mountain bike crank”. Simple. Note: Spindle, crank bolts, extractors, adjusting collar, and chairing lockring included. Chainrings and bottom bracket sold separately. Features: - Black anodized - Extractor caps : black - Length: 170mm Compatible with: - White Industries chainrings: TSR 1X/singlespeed. 8/9/10/11/12 and 12 flat-top chains. Shimano 12 speed chains must use a SRAM Eagle 12-speed PowerLock connector. - TSR Boost 1X/singlespeed: 8/9/10/11/12 and 12 flat-top chains. Shimano 12 speed chains must use a SRAM Eagle 12-speed PowerLock connector - VBC 2X: 9/10/11 speed chains and derailleurs (12 speed are too narrow). Campy and SRAM derailleurs not recommended. Shimano mountain 9/10/11 speed derailleurs are best with these rings on this crank. - Also compatible with Wolf Tooth “CAMO Direct Mount Spider For White Industries” - 5 different White Industries 30mm bottom bracket options - All 30mm cranks and spindles are made from U.S. sourced 2024-T365 aluminum Specs: - Designed around a 96mm OBW (Outer Bearing Width). This is the allowable outside-to-outside measurement of your BB bearings (with seals) when they are mounted to your frame. The bearing preload collar on the crank is adjustable and can accommodate slightly wider or narrower widths (+/- 1mm) than the target number. - Designed to fit 68mm/73mm or 86mm/92mm bottom bracket shells. 2x 2.5mm cup or spindle spacers needed on 68mm or 86mm shells. Part #BB30KIT includes both types of spacers - See “MARG30 Crank and Bottom Bracket Compatibility Chart” document below for BB/spacer info - Weight: 575g (175mm length w/spindle) - Q factor: 176mm

105 Left Crank Arm - For use with Shimano 105 FC-R700 cranksets - Color: Black - Spindle Interface Type: Hollowtech II - Length: 175

Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. Its smooth shifting rhythm maintains speed and acceleration over challenging terrain and provides optimized gear combinations and ratios for trail riding. Features: - HOLLOWTECH II Crankset (3x10-speed) - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Close step tooth profile for smooth shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 50

Specifications: - Outer ring material: Aluminum - Crank axle material: Steel - Average weight: 710g - Compatible bottom bracket type: Outboard - Crank axle finish: Plated - Gear arms: 4 - Compatible chain: HG 12-speed - Inner ring material: Aluminum - Inner ring finish: Anodized - Chain ring combination: 48-31 - Outer ring finish: Anodized - Crank arm material: Aluminum

The Shimano FC-RX820 crank balances weight savings, optimized efficiency and an array of gearing options that cater to the segmented demands of mixed-terrain riding. - Gravel-optimized 48-31t gear combination ratios preserve riding rhythm on rough surfaces - The 17t range covers an array of riding conditions - Smaller gear steps for cadence control on mixed-terrain riding - Hollowtech II crank arms provide strength and stiffness with the benefit of weight savings - Compatible with HG 12-speed chains - 47mm chainline - 151mm Q-factor

Shimano's new FC-RX810-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm. The 2x11-speed crank is available in a 48-31T, 40T, and 42T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Gravel gear ratios preserve riding rhythm over rough surfaces with wider tires - Optimum gearing for mixed terrains and riding styles - Wide-range double - Gear combinations: 48-31T, 40T, 42T

The SRAM GX Eagle DUB Fat Bike crankset delivers consistent performance every time out. Now featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 7000-series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer, and stronger crankset - Optimized 7000-series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB-compatible bottom bracket sold separately - 66.5mm chainline

The SRAM GX Eagle DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 7000-series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer, and stronger crankset - Optimized 7000-series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - 56.5mm chainline

The SRAM NX crankset delivers Eagle styling and performance to the newest addition to the Eagle ecosystem. Designed for SRAM's X-SYNC 2 chainrings, the NX crankset is engineered for complete chain control—each tooth's profile is precisely engineered to work quietly, efficiently, and securely with the Eagle chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design, which together allows for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of performance and durability. - 6000 series forged aluminum arms - 52.0mm chainline

The SRAM NX crankset delivers Eagle styling and performance to the newest addition to the Eagle ecosystem. Designed for SRAM's X-SYNC 2 chainrings, the NX crankset is engineered for complete chain control—each tooth's profile is precisely engineered to work quietly, efficiently, and securely with the Eagle chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design, which together allows for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of performance and durability. - 6000 series forged aluminum arms - 66.5mm chainline

The SRAM RED crankset leverages a pivotal design innovation: smaller chainrings and a wider cassette range. This leads to smoother and faster shifting up front and more useful gearing for today's riders. The new configurations improve cadence and efficiency while also delivering shifts that are crisp, clean and quick-every time. Features - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Improved front shifting performance for crisp and accurate front shifts - Unique chainring design results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability, simplicity and broad compatibility - Power upgradeable Specifications - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs, GXP/PF GXP 68mm - Chainring Size: 46/33, 48/35, 50/37 - Crank arm length: 165mm, 167.5mm, 170mm, 172.5mm, 175mm - Chainline: 45.0mm - BB Spindle Interface: 24mm, DUB - Chainring material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD): Direct Mount (DM) - Crank arm material: Carbon

Tracking your progress on gravel just got easier and more accurate. With our new spider-based power meter and removable Thread Mount chainrings, the RED XPLR AXS power meter is lightweight, reliable in all weather, and accurate within +/-1.5%. With dual-sided power measurement, even your loftiest gravel training goals are within reach. FEATURES - All-new design with removable and replaceable Thread Mount chainrings, available in 38T-46T - Power readings are accurate within +/-1.5% and aren’t affected by climate conditions during a ride - User replaceable CR2032 battery with 200-hour battery life - Measures right and left leg power balance - Ultra-light hollow carbon fiber crankarms are 29 g lighter than the previous generation - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Available in 160, 165, 167.5, 170, 172.5, and 175 mm lengths

The SRAM Rival 1 Wide Crankset features wider stance of the arms and chainrings to provide clearance for extra wide tires, giving you the option to explore new, more challenging routes. - Wide chainline crankset to fit the biggest gravel tires - Longer DUB crank spindle accommodates both Road and MTB width frame bottom bracket standards for unmatched cross-compatibility across brands - DUB™ bottom bracket (sold separately) adds durability and simplicity - 47.5mm chainline - Direct mount chainrings - Compatible with 135, 142 and Boost rear spacing SPECIFICATIONS - Number of Chainrings: Single - Chainline/Hub Compatibility: 135/142 Road Disc Hubs < 415 mm Chainstay , 141/148 Boost Hubs - Spindle Interface Type: SRAM DUB - Chainring BCD: Direct Mount SRAM - Color: Black - Crank Intended Use: Gravel - Pedal Spindle: 9/16" - Crank Length (mm): 172.5 - Rings: 46 - Drivetrain Speeds: 12 - BB Included: No

Forget front derailleurs; SRAM's Rival 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. It combines the durability, simplicity, and efficiency SRAM is know for on the road with their 1x mountain technology, X-Sync. - Single-ring drivetrain simplifies functionality - Forged aluminum with detachable spider: 42T and 52T X-Sync tall, square tooth design provides maximum control - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses for the inner chain links and rollers - Weight: 799g (24mm spindle, 172.5mm, 42T, no BB)

The XX1 Eagle DUB crankset has been re-examined and re-engineered. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon-tuned lay-up crank design provides extreme stiffness and light weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - CINCH technology offers game-changing compatibility - Includes 30mm CINCH spindle - Direct mount chainline: 52mm / 58.5mm (Flipped Ring) - 2X Cinch spider chainline: 50.5mm - Boost 2X Cinch spider chainline: 53.5mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 135/142 MTB Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Chainring BCD: Direct Mount CINCH - BB Included: No

Built off the proven Next R crank arm shape and spindle insert, the Next SL stands to be lighter, with major improvements in durability and carbon consistency. Made in Canada with American-sourced carbon, the Next SL is also stiffer, improving power transfer and giving you the competitive edge on your pedal-oriented cross country rig. - Increased stiffness and strength improves power transfer - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - Includes 30mm CINCH spindle, and is power meter compatible - Direct mount chainline: 52mm / 58.5mm (Flipped Ring) - 2X Cinch spider chainline: 50.5mm - Boost 2X Cinch spider chainline: 53.5mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Chainring BCD: Direct Mount CINCH - Weight: 418 - BB Included: No

The RX Crankset is our latest step into the Gravel and Road world, following our successful RX4 calipers and RS4 hubs. A two-piece hollow design allows for the removal of any unwanted material increasing stiffness and reducing weight. All are proudly designed, manufactured, and tested in Barnoldswick, UK to the same standards as our MTB cranks, for confident use on or off-road. - A two-piece hollow design allows for the removal of any unwanted material increasing stiffness and reducing weight - Tested to the same standards as our MTB cranks for confidence on or off-road - Featuring a self-extracting axle-to-arm interface, simplifying fitting and removal - Fully CNC machined 7050 Aluminum for precise material removal - Unique expanding spline/arm interface - Versatile Spline mount for chainring/spider - 30mm oversized axle - Weight: 518g (172.5mm and 5 bolt spider, w/o BB)

The Port Royal Crankset is named for an infamously gnarly hill in Philly with a very classy name. Combining modern technology and standards with a timeless aesthetic, these cranks are light, strong, and sensible. Available with two different spindle lengths for boost or non-boost setups. Compatible with SRAM 3-bolt chainrings. 30mm spindle. If you are from Philadelphia and are a cyclist then the name makes sense. If you are not from Philadelphia and are curious about the name it is safe to say any bicycle part that has seen the road Port Royal deserves to be considered a product worthy of being abused and ridden hard. Where to begin with describing this crank. Trying to combine modern technology and aesthetics from a 90’s era is not easy. We feel this crank is a blend of flowing lines much like the old forged cranks as well as a modern take on things with a 30mm spindle, shorter lengths and an eye on the stance. It is machined from US sourced 2024 to achieve the highest strength to weight ratio we can with aluminum. The extracting bolts and caps are made from 6061 aluminum. The system uses a spring steel wavy washer to supply bearing pre-load. There will be two spindle lengths one designed to work on both 73mm and 91.5mm bottom brackets (MTB) and another to work on 68mm and 86.5mm bottom brackets (Gravel Road). The needed BB cups are determined if you have 68/73 or 86.5/91.5 bottom brackets. 68mm and 73mm shells get external bearing assembles. 86.5mm and 91.5mm shells utilize internal bearing assemblies. The chainring or spider used is compatible with the SRAM 3 bolt direct mount system. Included is the chart for the Gravel Road and MTB assembly. All needed dimensions are available to ensure your frame has the correct clearances for the crank. The cranks have ISO 4210 Pt 2: 4.13, 4.13.6 - 4.13.7 approval from a licensed ISO test facility. The cranks are offered in two versions. The standard version and the HD (Heavy Duty). The heavy duty has re-enforcements on the backside that allow for heavier riders and riders that tend to be hard on equipment. The HD option adds 60 grams overall. You can select the HD for both MTB and Gravel. The cap color will include both the bolt and the cap in the color selected. The silver bolts are hard anodized for strength. All three lengths (165, 170 and 175) are available in both standard and HD. Images include a chainring and BB. The crankset does not include a chainring or the BB needed for your specific frame application. Weight for 170mm arms with spindle, bolts, thrust washers and extracting caps is 530 grams for MTB and 522 grams for Gravel Road.

The Port Royal Crankset is named for an infamously gnarly hill in Philly with a very classy name. Combining modern technology and standards with a timeless aesthetic, these cranks are light, strong, and sensible. Available with two different spindle lengths for boost or non-boost setups. Compatible with SRAM 3-bolt chainrings. 30mm spindle. If you are from Philadelphia and are a cyclist then the name makes sense. If you are not from Philadelphia and are curious about the name it is safe to say any bicycle part that has seen the road Port Royal deserves to be considered a product worthy of being abused and ridden hard. Where to begin with describing this crank. Trying to combine modern technology and aesthetics from a 90’s era is not easy. We feel this crank is a blend of flowing lines much like the old forged cranks as well as a modern take on things with a 30mm spindle, shorter lengths and an eye on the stance. It is machined from US sourced 2024 to achieve the highest strength to weight ratio we can with aluminum. The extracting bolts and caps are made from 6061 aluminum. The system uses a spring steel wavy washer to supply bearing pre-load. There will be two spindle lengths one designed to work on both 73mm and 91.5mm bottom brackets (MTB) and another to work on 68mm and 86.5mm bottom brackets (Gravel Road). The needed BB cups are determined if you have 68/73 or 86.5/91.5 bottom brackets. 68mm and 73mm shells get external bearing assembles. 86.5mm and 91.5mm shells utilize internal bearing assemblies. The chainring or spider used is compatible with the SRAM 3 bolt direct mount system. Included is the chart for the Gravel Road and MTB assembly. All needed dimensions are available to ensure your frame has the correct clearances for the crank. The cranks have ISO 4210 Pt 2: 4.13, 4.13.6 - 4.13.7 approval from a licensed ISO test facility. The cranks are offered in two versions. The standard version and the HD (Heavy Duty). The heavy duty has re-enforcements on the backside that allow for heavier riders and riders that tend to be hard on equipment. The HD option adds 60 grams overall. You can select the HD for both MTB and Gravel. The cap color will include both the bolt and the cap in the color selected. The silver bolts are hard anodized for strength. All three lengths (165, 170 and 175) are available in both standard and HD. Images include a chainring and BB. The crankset does not include a chainring or the BB needed for your specific frame application. Weight for 170mm arms with spindle, bolts, thrust washers and extracting caps is 530 grams for MTB and 522 grams for Gravel Road.

Unleash your Power with LG1 Carbon Cranks World Cup proven for years, the Q Factor, overall profile, and volume of our Gen4 cranks have been greatly reduced, while strength and fatigue life has been dramatically improved. What wizardry is this? The engineers won't say, but the graphs and race results don't lie! The spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance. The adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor. What's in the box: Cranks w/Self-Extractor, Installation Tools, Lockring, APS Adjuster, and Crank Boots - The lightest, purpose-built carbon Enduro and Downhill crankset - Built upon race-proven World Cup DH testing and results. Ultra-compacted carbon fiber arms are meticulously bonded to e*thirteen's Connect™ Polygon interface, which creates a robust, reliable, impact-resistant spindle-arm junction - Adjustable chainline accommodates multiple rear-axle spacing configurations, meaning you can achieve either configuration by simply placing the spacers inboard or outboard of the chainring - Carbon fiber downhill crank arms and aluminum spindle w/ Quick Connect™ lockring and Adaptive Preload Adjuster (APS), compatible with Quick Connect™ dual width Guidering M - Includes crank arm protectors, crank arm, and chainring/BB removal tools - 536g (34t M ring)

e*thirteen's TRS Race carbon crankset is crafted from lightweight components, so you can hit the trails at full speed. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - The adjustable chainline accommodates non-Boost (142mm), Boost (148mm), and Super Boost (157mm) - Compatible with e*thirteen's SL Guiderings (28-38t options for non-Boost and Boost frames) and UL Guiderings (30-42t options for Super Boost frames) - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Number of Chainrings: No Rings Included - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No

Rise and Grind with our lightest cranks ever! We applied decades of World Cup racing experience to develop our patented design for the lightest production carbon crankset we've ever made! Lightweight, 30mm spindle, APS preload adjuster, and self-extractor bring the class-leading combo to your door. - Lightest production crank on the market - Gen4 cranks have the spindle on the non-drive side of the crank for easier chain guide setup and drivetrain maintenance - Use a Boost chainring to fit non-Boost chainlines on this 68mm BB crank - Now includes an 8mm self-extractor, meaning the cranks can be removed with nothing more than an 8mm allen key - Carbon fiber crank arms and aluminum spindle w/ Quick Connect lockring and Adaptive Preload Adjuster (APS), compatible with all - Quick Connect guide rings - 385g (73mm w/32T UL chainring), 398g (68mm w/38T UL chainring)

The e*thirteen XCX Race crankset offers ultra-lightweight construction and uncompromising strength. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - Designed to be used with e*thirteen's ultra-lightweight UL Guidering (30-42t) for optimal weight savings - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 MTB Hubs , 141/148 Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No

The e*thirteen e*spec Race Carbon Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These carbon crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self extractor bolt is built into both arms for easy removal - World-Cup DH-rated layup and construction - Compacted carbon fiber with an additional 3k added to front and rear faces of crank for impact resistance - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No

The Legacy crank uses a super tough 2-1/2 piece construction, a larger 22mm spindle and square shaped chromoly arms to maximize strength. WeThePeople toughened up areas like the pedal boss with its own investment cast gusset, to beef things up. - Designed for use with a 22mm Mid Bottom Bracket (not included) - Full seamless Japanese 4130 chromoly tubing, liquid post heat-treated - Grind-friendly, square-shape arms - RSD/LSD compatible

WeThePeople's Team Crank uses a super-tough 2 1/2 piece construction, a larger 22mm spindle, and square-shaped chromoly arms to maximize strength. WeThePeople looked at areas where other brands' cranks often failed and toughened up areas like the pedal boss with its own investment cast gusset, to beef things up and eliminate those failures. The Legacy Crank also comes in a shorter 165mm option for all you 4-peggers out there.

WTP's team series crank featuring full seamless Japanese 4130 chromoly tubing.

The Vision Track Crank features oversized solid forged aero arms optimized for rigidity and a deep-tooth 49T chainring, as well as an ultra-stiff 30mm spindle. The 386EVO spindle design assures compatibility with all major bottom bracket shells. - Solid forged alloy 6061 - Forged 7050 30mm spindle - Polished anodized black with laser graphics - Number of Chainrings: Single - Chainline/Hub Compatibility: 120 Hubs - Crank Intended Use: Track - Pedal Spindle: 9/16" - Rings: 49 - Spindle Interface Type: 386 EVO - Drivetrain Speeds: Single Speed 1/2" x 1/8" - Chainring BCD: 144 - BB Included: No

With their New Rando crankset, Velo Orange meets the demand for the classic 50.4 BCD crank still sought after in randonneuring and touring circles around the world. New Rando is modeled after classic 50.4 BCD cranks but with modern touches to improve performance. These include ramped and pinned chainrings that are thicker for less flex, stainless steel hardware, and forged 7075 aluminum arms. Get the classic style and versatility you want with the modern performance you've come to expect. - Spindle interface: Square Taper JIS - Weight: 540g