Parts & Accessories
Xpedo cleat set for Xpedo M-Force pedals - Weight: 65g per set with hardware
- Made of wind and waterproof latex to keep your feet warm and dry
- Lightweight and flexible, No need for zippers or velcro that cause leaking
- Smooth form fitting design aids in aerodynamic efficiency
- Easily fits into jersey pocket or saddle bag
The ATAC Easy cleats are specifically for the mountain bike pedal and City Bike range of TIME (LINK, MX and XC range). The release angle of 10-degrees is easy for riders who want a quick step out. - Weight: 44g/pair
Replacement heel retention System for SIDI Shoes
Sidi's Caliper Buckles replace any Sidi ratchet system to get you back on the road. With precise tightening and simple loosening mechanisms, the Caliper Buckles keep your shoes secure. Retrofitting them onto older Sidis requires replacing the straps with Caliper Straps (sold separately).
Sidi's Caliper Straps are compatible with their Caliper Buckles (sold separately) to deliver a secure fit with the Soft Instep Closure System.
For cyclocross racing and other low-traction situations, screw Sidi's plated-steel MTB Toe Spikes into your shoes and gain a whole new level of confidence on run-ups through the mud.
Fits SP Carbon, Vent Carbon, Eleven Carbon/Composite, Millenium 4, Carbon Composite, and Carbon Lite soles
The Techno 2 Buckles' monofilament line-and-dial closure lets you achieve the perfect fit and maximum comfort and efficiency. Should the ones on your Sidi shoes wear out, these replacements are available.
Power saving, round pedal stroke and a healthy foot arch make the SQlab insoles a must for every foot in a cycling shoe! Suitable for all cycling shoes, but also for normal shoes which are used for cycling, as well as for other uses. Developed in collaboration with ex-runner-up triathlon World Champion and foot expert Bjorn Gustaffson, SQlab has developed insoles that support the specific requirements found in cycling for the weaknesses of the respective foot type.
Authentic Ritchey replacement cleats for WCS Micro Road Pedals. Note: only Ritchey replacement cleats work with the Micro pedal. - Beveled cleat compatible with Ritchey WCS Micro pedals - Compatible with SPD style pedals
Pearl Izumi's thinnest, lightest and most aerodynamic shoe cover is perfect for racing or riding in cool, windy conditions. It's made with a breathable P.R.O. Barrier Lite fabric that stretches to optimize your aero advantage while keeping your feet dry and comfortable. It also features a zippered rear closure for improved aerodynamics. Features: - P.R.O. Barrier Lite fabric provides lightweight wind protection and water resistance - Wind tunnel tested for aerodynamics - Zippered heel closure for improved fit and improved aerodynamics - Recommended for road shoes with external cleats - Upper: 50% nylon 40% polyurethane 10% elastane; Bottom: 59% nylon 25% Kevlar aramid 16% polyurethane; Imported
LOOK KEO compatible road cleats - Unique 2 piece design allows you to change cleats without losing position - Durable, high traction walking surface - Hardware included
Giro cycling shoes are designed for adventures, but sometimes conditions demand more. With the Toe Spike Kit, your mountain bike shoes can handle the toughest adventures. These machined steel toe spikes are designed to provide added traction in loose or slippery terrain. They are easy to install using the included wrench, and they are compatible with all Giro off-road shoes and most toe-spike-compatible MTB shoes from other brands. Harsh conditions won’t interrupt your adventures because the Toe Spike Kit will let you keep traction and keep moving.
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc
For optimum power transfer to the bike, leg power needs to be effectively converted into propulsion. The IP3 insoles from Ergon support and stabilize the power transfer from the legs and feet straight to the pedals. Due to the patented stabilization delta, a natural foot position is achieved through three points resulting in an efficient and comfortable motion sequence while pedaling. Made in Germany and developed with insole specialist Solestar.
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
Endura's Deluge Zipless Overshoes are ready to face the onslaught of any foul weather you can throw at it. With mountain bike or road bike compatibility, abrasion resistant sole and heel, and a tough nylon faced Neoprene upper front, these overshoes will keep your feet dry and warm despite the downpour. Totally waterproof and stretchable, these zipless bad boys stay in place no matter how hard you push. And since you're tough enough to stay out even when the sun can't, reflective accents help enhance visibility.
Crafted from tough, waterproof neoprene, Endura's MT500 II Overshoes will keep your feet dry and warm. These booties feature waterproof rear zips and a welded center seam for a snug, smooth fit over your mountain bike shoes. The grooved rubber toe caps help on muddy slopes and steep climbs while the Kevlar soles withstand tough terrain. There are also reflective details for enhanced visibility. Say goodbye to muddy shoes!
Endura's Road II Overshoes are an essential accessory for when the weather calls for rain, wind, and cold. Crafted from smooth neoprene, these water-resistant covers feature rugged Kevlar soles with cleat cutouts. They also have rear zips for a snug fit, durable stitching, reflective accents, and a crank rub protection print.
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Need to replace your buckle? Bont's Slimline Buckle Kit includes a pair of buckles, loop, a pair of 9 cm ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Slimline buckle with a Standard buckle.
Need to replace your buckle? Bont's Standard Buckle Kit includes a pair of buckles, loop, a pair of ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Standard buckle with a Slimline buckle.
Cold feet and soggy socks are things of the past with Bellwether's Aqua-No Booties. Their Aqua-No fabric and seam-sealed construction shuts out precipitation while letting air flow freely. They feature zip closures for easy on and off as well as reflective trim for enhanced visibility. Plus, cleat cutouts and reinforced heels and toes provide durability. Features: - Waterproof and breathable - Seam-sealed construction - Reinforced heel and toe - Fits any cleats - Reflective accents and logos - Zippered closure
Optimal insulation and wind protection for those cold weather rides. Features: - Windproof 3-Layer soft shell construction - Fleece lined for added warmth - Reinforced heel and toe - Fits any cleats - Zippered closure - Reflective accents and logos
45NRTH's Jaztronaut are temperature-blocking insoles designed for cycling footwear. These insoles are constructed with a 2mm panel of non-compressible aerogel insulation laminated inside durable EVA foam. Aerogel is a porous nanotechnology that has been used by NASA to insulate astronaut spacesuits! It has super-high thermal performance and does not require loft to trap heat. Simply put, these insoles say no to cold cleats, and yes to warm feet, even under pedal load.
Moisture management is one of the most important elements of winter cycling and can make or break a ride. On long rides in extreme conditions, having a spare pair of 45NRTH's Wølfgar boot liners means you can ride confidently knowing that you have a dry, fresh pair when you need it. Constructed with a wool/polyester blend for durability, Wølfgar's liner boot wicks moisture away from your skin while still maintaining its insulation value to keep your feet dry and comfortable. Hook-and-loop on the heel secures the liner inside the shell boot. For use with 45NRTH Wølfgar boots only (sold separately)
Page 1 of 1