Parts & Accessories
Replacement heel retention System for SIDI Shoes
Moisture management is one of the most important elements of winter cycling and can make or break a ride. On long rides in extreme conditions, having a spare pair of 45NRTH's Wølfgar boot liners means you can ride confidently knowing that you have a dry, fresh pair when you need it. Constructed with a wool/polyester blend for durability, Wølfgar's liner boot wicks moisture away from your skin while still maintaining its insulation value to keep your feet dry and comfortable. Hook-and-loop on the heel secures the liner inside the shell boot. For use with 45NRTH Wølfgar boots only (sold separately)
For optimum power transfer to the bike, leg power needs to be effectively converted into propulsion. The IP3 insoles from Ergon support and stabilize the power transfer from the legs and feet straight to the pedals. Due to the patented stabilization delta, a natural foot position is achieved through three points resulting in an efficient and comfortable motion sequence while pedaling. Made in Germany and developed with insole specialist Solestar.
Optimal insulation and wind protection for those cold weather rides. Features: - Windproof 3-Layer soft shell construction - Fleece lined for added warmth - Reinforced heel and toe - Fits any cleats - Zippered closure - Reflective accents and logos
Endura's Deluge Zipless Overshoes are ready to face the onslaught of any foul weather you can throw at it. With mountain bike or road bike compatibility, abrasion resistant sole and heel, and a tough nylon faced Neoprene upper front, these overshoes will keep your feet dry and warm despite the downpour. Totally waterproof and stretchable, these zipless bad boys stay in place no matter how hard you push. And since you're tough enough to stay out even when the sun can't, reflective accents help enhance visibility.
Endura's Road II Overshoes are an essential accessory for when the weather calls for rain, wind, and cold. Crafted from smooth neoprene, these water-resistant covers feature rugged Kevlar soles with cleat cutouts. They also have rear zips for a snug fit, durable stitching, reflective accents, and a crank rub protection print.
Crafted from tough, waterproof neoprene, Endura's MT500 II Overshoes will keep your feet dry and warm. These booties feature waterproof rear zips and a welded center seam for a snug, smooth fit over your mountain bike shoes. The grooved rubber toe caps help on muddy slopes and steep climbs while the Kevlar soles withstand tough terrain. There are also reflective details for enhanced visibility. Say goodbye to muddy shoes!
Road shoe cover that utilizes thin, elastic, brushed lining for comfort as well as durable PU coating for rain protection. Features - Windproof softshell fabric with water-repellent coating - Optimal Panel Construction (OPC) with anatomic patterning for pedaling comfort - Highly-stretchable neoprene openings stretch for easy on/off - 3D toe box design matches the contours of road shoes - Reinforced material on toes - Waterproof zipper and taped seams - Road specific semi-closed sole for fit and functionality - Reflective elements for low-light visibility Material - Main fabric: 38% Polyamide, 33% Polyester, 14% Elastane, 11% Chloroprene Rubber, 4% Rubber (Polyurethane breathable windproofing & Water repellency)
These off-road shoe covers utilize thin, elastic, brushed lining for comfort and have a durable PU coating for rain protection. - Windproof softshell fabric with water-repellent coating - Optimal Panel Construction (OPC) with anatomic patterning for pedaling comfort - Highly-stretchable neoprene openings stretch for easy on/off - 3D toe box design matches the contours of MTB shoes - Reinforced material on toes - Waterproof zipper and taped seams - Off-road specific semi-closed sole for fit and functionality - Reflective elements for low-light visibility Material - Main fabric: 39% Polyester, 33% Polyamide , 12% Chloroprene Rubber , 9% Elastane, 7% Rubber (Polyurethane breathable windproofing & Water repellency)
Power saving, round pedal stroke and a healthy foot arch make the SQlab insoles a must for every foot in a cycling shoe! Suitable for all cycling shoes, but also for normal shoes which are used for cycling, as well as for other uses. Developed in collaboration with ex-runner-up triathlon World Champion and foot expert Bjorn Gustaffson, SQlab has developed insoles that support the specific requirements found in cycling for the weaknesses of the respective foot type.
The Techno 2 Buckles' monofilament line-and-dial closure lets you achieve the perfect fit and maximum comfort and efficiency. Should the ones on your Sidi shoes wear out, these replacements are available.
Let's get real; toe covers are a great way to deal with cold weather. They can be pulled over the toe of most cycling shoes and left on for the whole winter, and people do more miles on 45-degree days than they do on 25-degree days (even in Canada). Our toe cover uses our AmFIB softshell fabric to keep out the wind and rain and we positioned the band to sit behind toe spikes so that they will work with road or mountain shoes. Kevlar on the underside increases durability while the hook-and-loop closure makes the fit adjustable and the mounting quick. - AmFIB Softshell provides superior wind and water protection. - Innovative power-band secures front of shoe cover under toes. - Kevlar bottom with hook-and-loop closure allows easy on and off. - BioViz reflective elements for low-light visibility. - For road or mountain bike shoes.
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Need to replace your buckle? Bont's Slimline Buckle Kit includes a pair of buckles, loop, a pair of 9 cm ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Slimline buckle with a Standard buckle.
Need to replace your buckle? Bont's Standard Buckle Kit includes a pair of buckles, loop, a pair of ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Standard buckle with a Slimline buckle.
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
Our best-selling shoe cover, this piece slips easily over road shoes to add warmth and wind protection for cool weather riding. Our AmFIB toe cover is the perfect answer to cool weather. Its softshell fabric offers terrific protection from wind and rain and is as easy to pull on as a sock. We have increased the stretch to accommodate wider shoes and sizes on the bubble. The opening is sized for any three-bolt cleat. - AmFIB Softshell provides superior wind and water protection. - Simple pull-on design. - BioViz reflective elements for low-light visibility. - For road shoes with external cleats.
For cyclocross racing and other low-traction situations, screw Sidi's plated-steel MTB Toe Spikes into your shoes and gain a whole new level of confidence on run-ups through the mud.
The ATAC Easy cleats are specifically for the mountain bike pedal and City Bike range of TIME (LINK, MX and XC range). The release angle of 10-degrees is easy for riders who want a quick step out. - Weight: 44g/pair
LOOK KEO compatible road cleats - Unique 2 piece design allows you to change cleats without losing position - Durable, high traction walking surface - Hardware included
These versatile toe covers utilize thin, elastic, brushed lining for comfort and have a durable PU coating for moisture protection. Features - Windproof softshell fabric with water-repellent coating - 3D-cut toe box matches the contours of cycling shoes - Specifically designed for road shoes - Toe area reinforced for durability Material Main fabric: 50% Polyester, 26% Polyamide, 9% Elastane, 8% Rubber, 7% Chloroprene Rubber (Polyurethane breathable windproofing & Water repellency)
Wear down the bottom of your shoes from too much cycling? The Toe and Heel Pad Set includes 4 pieces of rubber for a pair of your favorite Bont shoes along with screws to keep them in place.
Authentic Ritchey replacement cleats for WCS Micro Road Pedals. Note: only Ritchey replacement cleats work with the Micro pedal. - Beveled cleat compatible with Ritchey WCS Micro pedals - Compatible with SPD style pedals
Xpedo cleat set for Xpedo M-Force pedals - Weight: 65g per set with hardware
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc
Giro cycling shoes are designed for adventures, but sometimes conditions demand more. With the Toe Spike Kit, your mountain bike shoes can handle the toughest adventures. These machined steel toe spikes are designed to provide added traction in loose or slippery terrain. They are easy to install using the included wrench, and they are compatible with all Giro off-road shoes and most toe-spike-compatible MTB shoes from other brands. Harsh conditions won’t interrupt your adventures because the Toe Spike Kit will let you keep traction and keep moving.
Sidi's Caliper Buckles replace any Sidi ratchet system to get you back on the road. With precise tightening and simple loosening mechanisms, the Caliper Buckles keep your shoes secure. Retrofitting them onto older Sidis requires replacing the straps with Caliper Straps (sold separately).
Sidi's Caliper Straps are compatible with their Caliper Buckles (sold separately) to deliver a secure fit with the Soft Instep Closure System.
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair
Page 1 of 2 Next page