Wheels

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

Boostinators are hub specific conversions designed to take non-boost hubs and convert them to boost compatibility. Don't toss out that wheelset - Boostinate it.

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

These Presta valve stems are compatible with tubeless rims and tires for road, gravel, mountain, and fat bike wheels. The kit includes two Presta valve stems, two machined aluminum caps, two nuts, two extra valve cores, a unique machined aluminum valve core remover, and three rubber base options for compatibility with more rim internal shapes. ? - 44mm and 60mm stem length options - Slotted stem base for compatibility with tire inserts - Oversized stem nut for better sealing and easier removal - Stem threaded below rubber seal for better performance on single wall rims - Three rubber bases included: two types of cones (one installed), one channel - Replacement parts available via Wolf Tooth Right To Repair, including cap kit with two caps, nut kit with two nuts, and valve cores

Our CLD (Center Lock Disc) hubs are designed around the Center Lock splined rotor mounting interface as opposed to the 6-bolt mounting standard used on our XMR hub. The Center Lock system allows us to decrease the flange diameter which results in a slightly lighter hub that’s at home on road builds but retains the durability needed for mountain applications. Made in our shop from U.S. sourced 6061-T6 aluminum, they’re available in a range of drillings, colors, and axle configurations. A question we always get about our disc hubs is, “CLD or XMR? Which is better?”. Neither is “better” than the other. Both share the same internals and the differences really come down to the respective designs having to accommodate the two different rotor mounting interfaces. The CLD has a more compact look and is slightly lighter while the XMR has larger flanges which allow those really cool “windows” to be machined into them. The bottom line is you really can’t go wrong with either hub! Most of the time choosing is simply a matter of which disc rotor system you already have on your bike, so your choice is kind of made for you. And if you’re building a new bike, it’s not a bad idea to stick with the rotor system you’re using on your other bikes, just in case you want to swap things around. And to add to it, Shimano and SRAM don’t offer all their rotor models and sizes in both Center Lock and 6 bolt, so be aware of that when speccing out your new rig. - U.S. made 6061-T6 aluminum - Enduro ABEC 5 bearings - 6/4 titanium driver - 3-pawl, 48 point (7.5 degree) engagement - Easily serviceable/rebuildable - Compatible with Center Lock style rotors - Rotor lockrings not included SPECIFICATIONS - 256g - 32H

Our CLD (Center Lock Disc) hubs are designed around the Center Lock splined rotor mounting interface as opposed to the 6-bolt mounting standard used on our XMR hub. Made in our shop from U.S. sourced 6061-T6 aluminum, they’re available in a range of drillings, colors, and axle configurations. A question we always get about our disc hubs is, “CLD or XMR? Which is better?”. Neither is “better” than the other. Both share the same internals and the differences really come down to the respective designs having to accommodate the two different rotor mounting interfaces. Bottom line is you really can’t go wrong with either hub! - U.S. made 6061-T6 aluminum - Enduro bearings - Compatible with Center Lock style rotors - Rotor lockrings not included - Rotor lockring compatibility: Internally splined lockring such as Shimano SM-RT81 / Externally splined lockring such as Shimano SM-HB20 or HB-M8010 SPECIFICATIONS - 145g - Drilling: 24 - Axles: 12mm Thru (works with removable QR plugs) 12mm x 100mm Thru / 9mm x 100mm QR (plugs remove to convert to 15 Thru) - Bearings: Two Enduro ABEC 5 17287-2rs bearings - Spoke hole diameter: 2.6mm - Left flange diameter: 45mm - Right flange diameter: 45mm - Center to left flange: 20.5mm - Center to right flange: 34.5mm

Our CLD (Center Lock Disc) hubs are designed around the Center Lock splined rotor mounting interface as opposed to the 6-bolt mounting standard used on our XMR hub. Made in our shop from U.S. sourced 6061-T6 aluminum, they’re available in a range of drillings, colors, and axle configurations. A question we always get about our disc hubs is, “CLD or XMR? Which is better?”. Neither is “better” than the other. Both share the same internals and the differences really come down to the respective designs having to accommodate the two different rotor mounting interfaces. Bottom line is you really can’t go wrong with either hub! - U.S. made 6061-T6 aluminum - Enduro bearings - Compatible with Center Lock style rotors - Rotor lockrings not included - Rotor lockring compatibility: Internally splined lockring such as Shimano SM-RT81 / Externally splined lockring such as Shimano SM-HB20 or HB-M8010 SPECIFICATIONS - 145g - Drilling: 32 - Axles: 15mm Thru (works with removable QR plugs) 12mm x 100mm Thru / 9mm x 100mm QR (plugs remove to convert to 15 Thru) - Bearings: Two Enduro ABEC 5 17287-2rs bearings - Spoke hole diameter: 2.6mm - Left flange diameter: 45mm - Right flange diameter: 45mm - Center to left flange: 20.5mm - Center to right flange: 34.5mm

Our CLD (Center Lock Disc) hubs are designed around the Center Lock splined rotor mounting interface as opposed to the 6-bolt mounting standard used on our XMR hub. The Center Lock system allows us to decrease the flange diameter which results in a slightly lighter hub that’s at home on road builds but retains the durability needed for mountain applications. Made in our shop from U.S. sourced 6061-T6 aluminum, they’re available in a range of drillings, colors, and axle configurations. A question we always get about our disc hubs is, “CLD or XMR? Which is better?”. Neither is “better” than the other. Both share the same internals and the differences really come down to the respective designs having to accommodate the two different rotor mounting interfaces. The CLD has a more compact look and is slightly lighter while the XMR has larger flanges which allows those really cool “windows” to be machined into them. Bottom line is you really can’t go wrong with either hub! Most of the time choosing is simply a matter of which disc rotor system you already have on your bike, so your choice is kind of made for you. And if you’re building a new bike, it’s not a bad idea to stick with the rotor system you’re using on your other bikes, just in case you want to swap things around. And to add to it, Shimano and SRAM don’t offer all their rotor models and sizes in both Center Lock and 6 bolt, so be aware of that when speccing out your new rig. - U.S. made 6061-T6 aluminum - Enduro ABEC 5 bearings - Easily serviceable/rebuildable - Compatible with Center Lock style rotors - Redesigned axle to allow you to use the standard Center Lock lock nut provided with Shimano rotors - Rotor lockrings not included SPECIFICATIONS - 145g - 32H drillings - 100mm O.L.D. dimension (standard fork spacing, non-boost) - 12mm Thru axle - Two Enduro ABEC 5 17287-2rs bearings

The ENO freewheel is our durable single speed freewheel. Our freewheel has a long history of being durable, reliable and rebuildable. The ENO freewheel has been made rebuildable by first making everything replaceable, from the bearing and outer gear to the pawls and springs. Its is made durable and reliable by machining inner driver and outer gear case with extremely tight tolerances resulting in a freewheel that runs concentrically so there aren't tight and loose spots. A 36 point engagement system and a case hardened, nickel electro-plated outer gear case make this freewheel a perfect addition to your single speed. For trials riders or those wanting a beefier version we offer the trials freewheel with 72 points of engagement and a thicker outer gear case to withstand the rigors of a more demanding style of riding.

Our XMR+ (Cross/Mountain/Road) Boost hubs are designed around the ISO 6-bolt rotor mounting interface as opposed to the Center Lock mounting standard used on our CLD hub. The Boost spacing allows for wider hub flange spacing which results in better spoke bracing angles. Made in our shop from U.S. sourced 6061-T6 aluminum, they’re available in a range of drillings, colors, and axle configurations. A question we always get about our disc hubs is, “CLD or XMR? Which is better?”. Neither is “better” than the other. Both share the same internals and the differences really come down to the respective designs having to accommodate the two different rotor mounting interfaces. Bottom line is you really can’t go wrong with either hub! Most of the time choosing is simply a matter of which disc rotor system you already have on your bike, so your choice is kind of made for you. And if you’re building a new bike, it’s not a bad idea to stick with the rotor system you’re using on your other bikes, just in case you want to swap things around. And to add to it, Shimano and SRAM don’t offer all their rotor models and sizes in both Center Lock and 6 bolt, so be aware of that when speccing out your new rig. - U.S. made 6061-T6 aluminum - Enduro ABEC 5 bearings - 6/4 titanium driver - 3-pawl, 48 point (7.5 degree) engagement - Easily serviceable/rebuildable - Compatible with 6-bolt rotors SPECIFICATIONS - 306g - 32H - 12mm x 142mm Thru Axles

Whisky's No.9 30d road rims are designed to offer leading edge, tubeless performance on or off-road. These rims offer lightweight, stable platforms to build exquisite wheels. Its wide internal width pairs exceedingly well with a broad range of tires and provides versatility no matter what surface you’re riding. These disc brake-specific rims offer clean design and aesthetics. From tarmac to gravel, brevets to the CX course, this rim is Whisky's lightweight go-to for all round, drop bar performance. As with all rims they make, these come with tubeless valves and required tape in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs

Stainless spoke nipple flat washers from Whisky. - .3mm Thickness

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Right Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 9.5mm - 1 cone per bag COMPATIBLE HUBS: - Tiagra 4400, 9 Speed Rear - 105 SC 1056, 8 Speed Rear - 105 SC 1055, 7 Speed Rear - 105 SC 1051, 7 Speed Rear - RX100 A551, 8 Speed Rear - RSX 410, 7 Speed Rear - XT M737, 8 Speed Rear - XT-II M732, 7 Speed Rear - Deore LX M565, 8 Speed Rear - Deore LX/Mtn LX M550, 7 Speed Rear - STX-RC MC38, 8 Speed Rear - STX-RC MC30, 7 Speed Rear - STX MC32/33, 7 Speed Rear - Nexave IMC50, 8 Speed Rear - Alivio MC18, 8 Speed Rear - Alivio MC12, 7 Speed Rear - Acera-X MC290, 7 Speed Rear - Altus RM-40, 7 Speed Rear - FH-R080 Silent Hub, 8 Speed Rear - FH-R050 Silent Hub, 7 Speed Rear

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech 9mm x 26, front hub - Compatible with 9mm x 26 axle - Cone Wrench Size: 13mm - Threads: 9mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Joytech 9mm x 26, front hub - Taiwanese hubs with 9mm x 26 axle - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

- Evo Tour 19 27.5" double wall rim—Black - Inner Rim Width: 19 mm - Rim Height: 20 mm - Pin joint construction - No Eyelets - Schrader valve - 36 holes - Stainless steel spokes—Silver - Freewheel

Rims: Evo Tour 19 27.5" - ETRTO 584-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Front hub: - QR 9x100mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Shimano HB-MT400-B (Black), Shimano logo, 15mm E-THRU, O.L.D. 110mm BOOST - Quick Engagement Pawl Ratchet (36T / 10deg engagement) - Center Lock disc mount - Adjustable bearings - E-THRU Axles not included - Tubeless Compatible (Tubeless Valve included) Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Size: 29in Width ID (mm):30 Rim Color: Black Rim Model: WTB ST TCS 2.0 i30 Hub Model: OR8 MT-3100 Sealed Hub Color: Black Gears: 11-12s XD Brake Type: 6B Spoke Type: DT-2.0 SS BK Spoke Count: 32H Valve: Presta Type: Tubeless Compatible ISO: 622 Search 1 Axle: Thru 12mm

Proterra Light i25 wheels care for all your Road Plus adventure riders out there. The extra traction and comfort of a high-volume 650B tire is pretty nice, eh? Proterra Light i25 wheels feature an open-cavity profile to minimize weight and maximize efficiency as you get lost on backroad detours. Like all other Proterra wheels, the responsive 6-pawl freehub offers 3.7 degrees of reliable engagement, whether you're cruising to work or have your frame bag bursting at the seams for an overnight adventure. Designed for Road Plus, because more volume is always more fun. - 25mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Top-tier EZO sealed bearings - Center Lock rotor mounts

Proterra Light i25 wheels care for all your Road Plus adventure riders out there. The extra traction and comfort of a high-volume 650B tire is pretty nice, eh? Proterra Light i25 wheels feature an open-cavity profile to minimize weight and maximize efficiency as you get lost on backroad detours. Like all other Proterra wheels, the responsive 6-pawl freehub offers 3.7 degrees of reliable engagement, whether you're cruising to work or have your frame bag bursting at the seams for an overnight adventure. Designed for Road Plus, because more volume is always more fun. - 25mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Top-tier EZO sealed bearings - Center Lock rotor mounts

WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

Velox Rim tape - Adhesive backed cotton cloth tape - Helps protect against tube punctures - Sold in single rolls

- Tubeless compatible US made aluminum disc-only rim with a 25mm wide aero profile - Specifically tuned to be aerodynamically paired with 23-28c road tires, though a 20mm inner width compliments even the most voluminous gravel and cyclocross tires - Tubeless ready using 24mm Velotape

Short and stout sidewalls guard against pinch flats and denting from impacts: a pothole or a rocky descent. A generous 25mm internal rim width allows more tire contact with the road which supports you and your gear more safely and comfortably than conventional narrow rims. - Tubeless ready with the use of Velotape SPECIFICATIONS - Hub Drilling: 32 - Color: Black - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Brake Track: Non-Machined - Valve: Presta - Rim Width (Internal): 25 - Manufacturer Spec ERD (mm): 597 - Rim Material: Alloy - Tire Type: Tubeless Ready - Weight: 675g - Rim Center Offset (mm): 0

- Mid Fat, and Fat Race are what this thing is all about - Perfect for sand, snow, trail, and everything in between - Double wall for increased stiffness and tubeless ready - 45mm width disc-only rim

Sometimes you veer slightly off course and end up in a place like MARS. If you are running our rider-designed, ATB performance tuned rubber, you'll not only be styling for the NASA livestream, but you'll also be in for a great ride. MARsala also happens to be a rich and nutty fortified wine from Sicily. If these tires sell, Patz and Ron will be both rich and nutty. -JFF means Just For Fun, but not ONLY for fun- these tires are equally equipped for long days locked in the pain dungeon as they are for a Sunday tour of Portland's vegan doughnut shoppes. -JFF is our most accessible offering; think of it as the industry standard in terms of casing and rubber spec. This is approachable luxury- the cubic zirconia of our catalogue. -JFF more durable casing than our RACE offerings. Fixing flats, while character building, has never been fun -Continuous ramped center delta for a fast roll when propelled, and confident braking traction when modulated -Side knobs won't let you down, or let you fall down in loose, dry corners -Wide knob spacing sheds mud and makes artistic patterns in the space dust -Did you know the triangle is the strongest shape in this dimension? -Tread rubber extended down sidewall for added protection without sacrificing the premium ride quality of our flexible casings -27.5 pairs as a front with our ROSé or CAVA 650b in the rear for a fast and fun slackened ATB rat-rover -Special edition MARS dirt infused compound for 26" release -Tubeless compatible for a rover mimicking psi of 20-30psi -Tires packaged and sold individually -27.5" x 2.2?? and 26" x 2.2?? -620g and 610g

We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels

Surly Thru-Axles are low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Offered in several sizes, for both front and rear wheels. 12x142 Rear Thru Axle: - Fits: Midnight Special and MDS Dropout bikes including Instigator, Legacy Karate Monkey & Legacy Krampus. 12x142/148 Rear Thru Axle: - Designed for frames with Surly Gnot Boost spacing (145mm), capable of working with 142 or 148mm rear hubs - Fits: Karate Monkey, Krampus, Troll, Ogre, ECR 12x177 Rear Thru Axle: - Fits: Wednesday 12x197 Rear Thru Axle: - Fits: Ice Cream Truck, Big Fat Dummy 12x100 Front Thru Axle: - Fits: Midnight Special 15x110 Front Thru Axle: - Fits: Karate Monkey, Krampus 15x150 Front Thru Axle: - Fits: Wednesday, Ice Cream Truck, Big Fat Dummy

Surly's low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Not sure which one fits your bike? Get in touch, and we'll ensure you're choosing the correct axle for your application.

Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.

- Converts Schrader rims to Presta - Rubber - Sold individually

Rim strip for Sun Ringle Mulefut rims is designed to provide a solid base under a layer of tubeless tape. - Material: Nylon - Wheel Size: 27.5+ - Rim Strip Width (mm): 60 - Tire Diameter: 27" - Adhesive: No

Tubeless tape for Sun Ringle Mulefut rims is designed to be used in conjunction with Mulefut rim strips for support. - 10 Meter roll - covers at least two rims per roll

The Mulefut 80SL V2 for exploring deep backcountry territory or racing the local snow circuit. Mulefut 80SL V2 is the fatbike rim reinvented. - Trapezoid-cut Mulefut 80SL V2 rims for optimum widestance tire shaping, trailduty impact resistance, STR tubeless tire retention, and more weight savings - J-bend SRC hubs with high-strength Dual-Tooth pawls and lightweight aluminum axles - Wheelsmith doublebutted spokes and brass nipples, precision tension balanced with SpokePrep assembly compound for longevity - Mulefut wheels come with rimstrips and tubeless tape pre-installed SPECIFICATIONS - Hub/Brake Compatibility: 6-Bolt Disc - Color: Black - Wheel Size: 26" Fat - ISO Diameter: 559 / 26" mtn - Front Axle: 15mm Thru x 150mm - Valve: Presta - Rim Width (Internal): 74mm - Tire Type: Tubeless Ready Clincher

The Mulefut 80SL V2 for exploring deep backcountry territory or racing the local snow circuit. Mulefut 80SL V2 is the fat bike rim reinvented. - Trapezoid-cut Mulefut 80SL V2 rims for optimum wide stance tire shaping, trail duty impact resistance, STR tubeless tire retention, and more weight savings - J-bend SRC hubs with high-strength Dual-Tooth pawls and lightweight aluminum axles - Wheelsmith double-butted spokes and brass nipples, precision tension balanced with SpokePrep assembly compound for longevity - Mulefut wheels come with rim strips and tubeless tape pre-installed SPECIFICATIONS - Hub/Brake Compatibility: 6-Bolt Disc - Color: Black - Wheel Size: 27.5" Fat - ISO Diameter: 584 / 650b / 27.5" - Front Axle: 15mm Thru x 150mm - Valve: Presta - Rim Width (Internal): 74 - Tire Type: Tubeless Ready Clincher

Trapezoid-cut for optimum widestance tire shaping, trailduty impact resistance, STR tubeless tire retention, and more weight savings. Mulefut 80SL v2 for exploring deep backcountry territory, off the- beaten path trails and snow-covered wonderlands. - Trapezoid-cut offers optimum widestance tire shaping, trailduty impact resistance, STR tubeless tire retention, and weight savings SPECIFICATIONS - Hub Drilling: 32 - Color: Black - Wheel Size: 26" Fat - ISO Diameter: 559 / 26" mtn - Brake Track: None - Valve: Presta - Rim Width (Internal): 74 - Manufacturer Spec ERD (mm): 551 - Rim Material: Alloy - Tire Type: Tubeless Ready - Rim Center Offset (mm): 0

Trapezoid-cut for optimum widestance tire shaping, trailduty impact resistance, STR tubeless tire retention, and more weight savings. Mulefut 80SL v2 for exploring deep backcountry territory, off the- beaten path trails and snow-covered wonderlands. - Trapezoid-cut offers optimum widestance tire shaping, trailduty impact resistance, STR tubeless tire retention, and weight savings SPECIFICATIONS - Hub Drilling: 32 - Color: Black - Wheel Size: 27.5" Fat - ISO Diameter: 584 / 650b / 27.5" - Brake Track: None - Valve: Presta - Rim Width (Internal): 74 - Manufacturer Spec ERD (mm): 575 - Defined Color: Black - Rim Material: Alloy - Tire Type: Tubeless Ready - Weight: 820 grams - Rim Center Offset (mm): 0

Product specs: - Front hub features - 7075 t6 alloy axle - Qr or 15mm axle type - Japanese cartridge bearings - 28,32 hole count - 205g - Rear hub features - 7075 t6 alloy axle - Qr or 12x142mm axle type - Four sealed cartridge bearings - 28,32 hole count - 325g

Replacement freehub bodies for Sun Ringle wheels that accommodate a variety of cassette types. Cassette Body Type: Shimano Micro Spline

Replacement freehub bodies for Sun Ringle wheels that accommodate a variety of cassette types.

Replacement freehub bodies for Sun Ringle wheels that accommodate a variety of cassette types. 12 x 142mm & 10 x 135mm end caps included

Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.

Not all carbon rims are created equal. If your carbon rim is too stiff, you're losing speed and risking tire pinch flats. The Stan’s Crest CB7 rim with RiACT absorbs radial vibrations and damps impacts. It's a difference you can feel in the ride of the bike almost instantly. First introduced with Stan's legendary Valor rim, Stan's impact absorbing RiACT technology has evolved to be more responsive and even more durable. The Crest CB7's new layup and rim shape allows for 10mm of radial compliance to absorb larger impacts. The new rim also matches the Valor's strength while using less material to save weight. And when it comes to the lateral stiffness needed for steering precision and control, the new CB7 layup delivers. Wider than the original Valor while still optimized for XC tire widths, the Crest CB7 keeps you in control and rolling faster. Stan’s backs up the technology in every Crest CB7 rim with one of the best warranties available, including lifetime crash replacement. Better by design, the Crest CB7 is the most advanced rim available for creating a lighter, stronger, more reliable, and faster rolling wheelset. - Designed for cross country racing and riding - Patented low-profile sidewalls and 23mm internal rim width - Ultra-light 325g (29") rim weight - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for easier tubeless setup and the best reliability - WideRight rim design optimized for 2.00 - 2.25-inch tires

Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. Comes standard on Neo hubs. - 6-pawl system provides 36 points of contact and 10-degree engagment for quick acceleration - Chromed steel bearings - Wide bearing stance and axle design reduces flex and adds durability - Low drag main seal prevents contamination and reduces resistance SPECIFICATIONS - Cassette Body Type: Shimano Micro Spline

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place

Rear end cap conversion kits for NoTubes Neo and Neo Ultimate hubs - SealLock end caps feature a low friction U-cup seal that snaps into place

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 26-inch x 1 3/8 - ISO Diameter: 590 / 26 x 1 3/8-inch - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher

Sta-Tru Double Wall Rear Wheel: - Double Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / Road / 29" - Tire Type: Clincher

- Straight gauge stainless steel, bag of 36, includes 14g silver nipples - 281mm lengths are for most high-flange track hubs and velocity deep V rims - 308mm spokes are designed to be cut and re-threaded for desired length

The purely domestic original spokes released by SimWorks for the first time are manufactured by requesting Hoshi Kogyo, the last spoke maker in Japan and the only maker that has NJS approval. The base of this Peregrine Spoke is a Wing Star spoke that has greatly improved material properties such as breaking strength by applying a unique special processing to the carefully selected stainless steel material (SUS304). The specially processed finish changes the color on the surface, creating a unique golden wing star spoke with a hardness that sets it apart from ordinary stainless silver, and a depth and elegance that is a bit different. The biggest problem with stainless spokes, which Hoshi Kogyo is proud of, which can be assembled harder than Star Bright, is the breakage of the spoke neck caused by increasing the tension. It was generally accepted that the responsive and stiff wheels that many people demand come at the expense of durability at the cost of their hardness. Compared to the highly rigid carbon rims that are expanding the market, wheels that become stiffer and more rigid like bottomless are not the best for everyone, and hard rims are fitted with moderately flexible spokes. By doing so, the running quality and durability will improve. Wingstar spokes are flexible yet solid core spokes, just like high-quality al dente pasta, and can be said to be the best spokes aimed at achieving both running and durability that cyclists demand. For those who use bicycles as a means of transportation such as touring and daily commuting, the 14G straight wing star and the single butted wing star spokes whose thickness changes to 14-15G are the features mentioned above. It is no exaggeration to say that it is a new standard spoke for assembling a wheel that is lightweight, has a firm reaction performance, and is durable by making full use of the above and combining it with a high quality rim. * Unlike the standard spokes of the stars, the size of the nipple is 3.2mm (world standard size) so that it can be repaired wherever you go. * Black nipple is included. Specifications -Sales unit: 72 -Length: 310mm (spoke cut not included)- -Material: Stainless steel (SUS304) -Weight: 7.6g (plain | 310mm | 1 piece) -Color: Wing Star Gold ** -Size: 14G plain -Nipple: Comes with world standard 3.2mm brass nipple (black) ** Due to special processing, the color may change slightly depending on the production lot. Made in Japan

SimWorks' purely domestic original spokes and nipples are requested from Hoshi Spoke, the last spoke manufacturer in Japan and the only manufacturer with NJS approval. From daily commuting to weekend races and recreational rides, and above all, long-distance touring where durability is required- it has surpassed the market in recent years so that it can firmly protect your feet, just hard It is not just a spoke that emphasizes reaction performance, but a high-quality spoke that has moderate flexibility and can be used for a long period of time, with the highest priority on durability. Your typical spoke nipple is post-processed by plating or they're constructed of aluminum but this time SimWorks asked to leave the brass material raw- suitable and handsome as it is. Since the surface is not processed, it will be a little softer than a normal nipple, but it has adequate durability to withstand normal use, and you can enjoy the natural oxidized aging characteristic of brass by specing it and letting it roll. Made in Japan Specifications - Sales unit: 72 pieces - Material: brass - Color: brass color - Size: 14G, 15G - Weight: 72g (72 pieces)

SimWorks' purely domestic original spokes are requested from Hoshi Spoke, the last spoke manufacturer in Japan and the only manufacturer that has NJS approval. The base of this Peregrine Spoke is a wing star spoke that has greatly improved material properties such as breaking strength by applying a unique special processing to the carefully selected stainless steel material (SUS304). The specially processed finish changes the color on the surface, creating a unique golden wing star spoke with a hardness that sets it apart from ordinary stainless silver, and a depth and elegance that is a bit different. The biggest problem with stainless spokes, which Hoshi Kogyo is proud of, which can be assembled harder than Star Bright, is the breakage of the spoke neck caused by increasing the tension. It was generally accepted that the responsive and stiff wheels that many people demand come at the expense of durability at the cost of their hardness. Compared to the highly rigid carbon rims that are expanding the market, wheels that become stiffer and more rigid like bottomless are not the best for everyone, and hard rims are fitted with moderately flexible spokes. By doing so, the running quality and durability will improve. Wingstar spokes are flexible yet solid core spokes, just like high-quality al dente pasta, and can be said to be the best spokes aimed at achieving both running and durability that cyclists demand. For those who use bicycles as a means of transportation such as touring and daily commuting, the 14G straight wing star and the single butted wing star spokes whose thickness changes to 14-15G are the features mentioned above. It is no exaggeration to say that it is a new standard spoke for assembling a wheel that is lightweight, has a firm reaction performance, and is durable by making full use of the above and combining it with a high quality rim. * Unlike the standard spokes of the stars, the size of the nipple is 3.2mm (world standard size) so that it can be repaired wherever you go. * Black nipple is included. Made in Japan Specifications - Length: 310mm (spoke cut required) - Material: Stainless steel (SUS304) - Weight: 7.6g (plain | 310mm | 1 piece) - 6g (single butt | 310mm | 1) - Color: Wing Star Gold ** - Size: 14G Plain & 14-15G Single Battet - Nipple: Comes with world standard 3.2mm brass nipple (black) ** Due to special processing, the color may change slightly depending on the production lot.

SimWorks is pleased to introduce our first rim developed in collaboration with Velocity USA - The Standalone 001. Built with the same aluminum extrusion as the industry workhorse Cliffhanger rim that has become a go-to for riders looking to build a quality off-road touring or ATB wheel, SimWorks has embellished upon this tubeless compatible, bulletproof rim with an aluminum eyelet for even greater strength and durability, as well as lending a more classic style. Offered in anodized grey, anodized olive, traditional black and traditional silver. Regardless of the vintage and spec of the bike you might choose to incorporate the Standalone- you can rest assured that you'll have a capable travel companion on your farthest flung adventures- be they across town, or across the continent. Specifications - Size: 700c/29" (622 BSD) - Material: Aluminum - Drilling: 32 hole - Tire Compatibility: Clincher/Tubeless - Width: 30mm outer / 25mm-hook to hook internal - Height: 21.6mm - Optimal Tire Width: 45mm-65mm - Weight: 640g (622)

- High efficiency, lightweight dynamo hubs are great for powering lights, chargers and other electronics while riding - Designed for reliability in extreme conditions - 6-volt 3-watt output SPECIFICATIONS - Axle/spacing (mm): 12x100 TA - Brake: 6-bolt (IS) disc - Hole: 32h - Color: black - Weight: 419g - Flange diameter: 58mm left and 52mm right - Center to flange: 25mm left and right **We're known for our custom wheel builds. Call or text us to get started on building up a wheelset using these hubs.

- High efficiency, lightweight dynamo hubs are great for powering lights, chargers, and other electronics while riding - Designed for reliability in extreme conditions - 8X-series hubs are 78% efficient at 15 kph (9.3 mph) - 6-volt 3-watt output SPECIFICATIONS - Axle/spacing (mm): 15x100 TA - Brake: center lock disc - Hole: 32h - Color: black - Weight: 468g - Flange diameter: 58mm left and right - Center to flange: 25mm left and right **We're known for our custom wheel builds. Call or text us to get started on building up a wheelset using these hubs.